Connect the Elinchrom Bridge to a device with Bluetooth

• Download the latest Elinchrom Studio App for iOS or Android and Software for macOS or Windows.
• Update the Elinchrom Bridge or the Elinchrom ONE/FIVE to the latest Firmware (with the Elinchrom Updater).
• Activate Bluetooth on your device.
• Switch ON the Bridge or the Elinchrom ONE.
• Launch the App/Software and find the connected Bridge / Elinchrom ONE/FIVE displayed in the window.
• The LED of the Bridge flashes in Blue.
• Chose the frequency channel 1 to 20, depending on which channel your flash units are set, normally to channel 1.
• Scan for enabled Elinchrom flash units.
• Start to control the units.

Battery run time is about 6 to 8 hours, but the Bridge can also be used with the USB micro cable connected to your computer for charging. You can chose if you use the USB cable or the Bluetooth connection.