The ELB 500 TTL is a unit designed to empower the workflow of portrait photographers both in studio and on location. Combining 500Ws of power with a feature set including TTL, HSS, Active Charging, Full Asymmetry with built-in Skyport protocol.

Please note, this item does not include the ELB 500 Battery (19297).

With 400 flashes on a single charge. This removable Li-Ion battery for the ELB 500 TTL unit allows you to charge the battery while actively shooting*, making the pack easy to use in studio and on-location.

*Active Charge

Charger for the ELB 500 TTL.

Rely on the battery for on location work or plug it in the mains while shooting in studio with the Active Charge* feature.

*Allows to charge while shooting.

The ELB 500 Snappy offers carrying comfort and protection to the ELB 500 TTL system.

The ELB 500 Snappy is included in all ELB 500 TTL To Go and ELB 500 TTL Dual To Go Sets.

One head for all needs to make photographer choices easier than ever.

The ELB 500 Head is smaller than speedlites yet delivers 10 times more power.

It is lightweight enough to be mounted on a camera bracket or boom arm while on location.

Supplied with a 2.5 m flash cable and a protective cap.

*The use of umbrellas sizes bigger than 85 cm is not recommended.
**Only compatible with the ELB 500 TTL battery power pack.

Replacement plug-in flashtube for ELB 500 and ELC 500 heads.

This durable protective cap keeps the flashtube and the LED pilot light safe as well as making Quadra heads even more portable!

Enables photographers to use any accessory of the Elinchrom range such as Rotalux and Litemotiv softoxes or any other EL accessory on the Quadra flash heads.

Beware when using heavier third-party accessories, as these might put stress on the Q-Reflector Adapter MK-II.

This 1 m extension cable fits to all Quadra, ELB 400 and ELB 500 flash heads.

Extension cables may reduce power output and slow down flash duration.

This 2 m extension cable fits to all Quadra, ELB 400 and ELB 500 flash heads.

Extension cables may reduce power output and slow down flash duration.

This 5 m extension cable fits to all Quadra, ELB 400 and ELB 500 flash heads.

Extension cables may reduce power output and slow down flash duration.

To use with any 12 V car battery. This charger is only compatible with the Lithium-Ion battery of the ELB 400 and Quadra systems.

This Lithium-Ion battery is a lightweight battery dedicated to the ELB 400 system and is backwards compatible with Quadra systems.

This battery offers up to 350 full power flashes.

This Lithium charger is dedicated to the Lithium-Ion battery of the ELB 400 and is backwards compatible with Quadra systems.

To use with any 12 V car battery. This charger is only compatible with the Lithium-Ion battery of the ELB 400 and Quadra systems.

Dedicated to sharper images –reach an incredible 1/5700 th of a second with an Action head to freeze your subject's motion!

Includes 2.5m flash cable, Quadra 13.5 cm reflector and Multi function cap.

*The use of umbrellas sizes bigger than 85 cm is not recommended.
** Only compatible with Quadra and ELB 400 battery power packs.
*** Not recommended for Hi-Sync photography.

The all-rounder. Provides a great balance between price and performance for general photography.

Includes 2.5m flash cable, Quadra 13.5 cm reflector and Multi function cap.

*The use of umbrellas sizes bigger than 85 cm is not recommended.
** Only compatible with Quadra and ELB 400 battery power packs.
*** Not recommended for Hi-Sync photography.

The Quadra HS head is the ultimate power head for any ELB 400 or Quadra system. It offers optimised performance for Hi-Sync photography, such as high shutter speeds or overpowering the sun and limits the gradient effect to a maximum.

Includes 2.5m flash cable, Quadra 13.5 cm reflector, Quadra protective cap and the multi function cap.

*The use of umbrellas sizes bigger than 85 cm is not recommended.
** Only compatible with Quadra and ELB 400 battery power packs.

This durable protective cap keeps the flashtube and the LED pilot light safe as well as making Quadra heads even more portable!

Enables photographers to use any accessory of the Elinchrom range such as Rotalux and Litemotiv softoxes or any other EL accessory on the Quadra flash heads.

Beware when using heavier third-party accessories, as these might put stress on the Q-Reflector Adapter MK-II.

Replacement plug-in flashtube for Quadra Action heads.

Replacement plug-in flashtube for Quadra Pro / S heads.

Replacement plug-in flashtube for Quadra HS heads.

This is the ultimate combination for beauty and action photography with up to a 1/4500 s when plugged into the Quadra Hybrid super fast channel B. Two metre flash cable enables photographers to use it freehand (with the battery pack shouldered or in a backpack).

The internal Ringflash diameter of 100 mm accepts a wide range of camera lenses.

The snappy offers carrying comfort and protection to any existing Quadra or ELB 400 system.

The ELB 400 Snappy requires a shoulder strap, for instance the ELB 400 shoulder strap.

Air cushioned shoulder strap, adjustable, made of non-slip fabrics. Designed to clip to any existing Quadra and ELB 400 unit.

This 1.5 m angled cable fits to all Quadra flash heads.

Longer cables may reduce power output and slow down flash duration.

This 2.5 m angled cable fits to all Quadra flash heads.

This is the standard cable supplied with Quadra heads.

Extension cables may reduce power output and slow down flash duration.

This 3.5 m angled cable fits to all Quadra flash heads.

Extension cables may reduce power output and slow down flash duration.

This 1 m extension cable fits to all Quadra, ELB 400 and ELB 500 flash heads.

Extension cables may reduce power output and slow down flash duration.

This 2 m extension cable fits to all Quadra, ELB 400 and ELB 500 flash heads.

Extension cables may reduce power output and slow down flash duration.

This 5 m extension cable fits to all Quadra, ELB 400 and ELB 500 flash heads.

Extension cables may reduce power output and slow down flash duration.

Adapts Ranger RX flash heads to ELB 400 and Quadra powerpacks. 

Mains modelling lamp and fan are deactivated.

Adapts EL powerpack flash heads to ELB 400 and Quadra powerpacks. 

Mains modelling lamp and fan are deactivated.

Very transportable by its compactness, this small size softbox has been designed for portraits and product photography.

The EL speed ring and rods are designed to give good stability and quick assembly.

For Quadra heads and ELM8 unit only.

This Portalite softbox is designed to work as a small beauty dish when used with the optional deflector set.

The EL speedring and rods are designed to give good stability and quick assembly.

For Quadra heads and ELM8 unit only.

This reflector combines a high output with a good spread of light while the internal recess accepts 18 cm grids. Offers one extra stop of light.

For Quadra heads and ELM8 unit only.

This reflector, part of single heads and sets, offers a wide angle light distribution as a stand alone or umbrella reflector.

For Quadra heads and ELM8 unit only.

This grid very strongly limits the light spread and offers sharper shadows. 

Fits only the RQ Grid Reflector 18 cm and the Grid Reflector 18 cm.
Excessive heat can damage units and accessories.
Reduce modelling lamp power when reflectors are used with grids or snoots.
Grids should never be used with 650W modelling lamps.

This grid strongly limits the light spread and offers sharper shadows. 

Fits only the RQ Grid Reflector 18 cm and the Grid Reflector 18 cm.
Excessive heat can damage units and accessories.
Reduce modelling lamp power when reflectors are used with grids or snoots.
Grids should never be used with 650W modelling lamps.

This grid greatly limits the light spread and offers sharper shadows. 

Fits only the RQ Grid Reflector 18 cm and the Grid Reflector 18 cm.
Excessive heat can damage units and accessories.
Reduce modelling lamp power when reflectors are used with grids or snoots.
Grids should never be used with 650W modelling lamps.

Three in one solution: Protection cap, frosted diffusion and filter support for coloured gelatine filters.

Only for Quadra Refector 13.5 cm

Designed with the photographer in mind, made out of durable nylon and YKK zippers, this is the ideal solution to fit portable flash such as the ELB 400 or previous Quadra series.

Supplied with rain protective cover, adjustable and comfortable shoulder strap, 4 vertical and 4 horizontal dividers for exibility and 4 velcro straps to securely attach tripods or umbrellas.

Dimensions
L x H x W: 31.4 x 60.5 x 21.7 cm
Weight: 3.1 kg

A robust shoulder bag, which can carry safely two flash heads or two packs up to 32 cm long. Two removable and adjustable dividers allow to easily compartiment this very versatile bag.

With its robust design of rubberised large handle and pressure equalisation valve, this case will keep out dust, humidity and is crash proof. 

This carrying case is specifically designed to take ELB 400 and Quadra To Go sets.

This boom arm with rubberised handgrips is a comfortable way to hold lighting gear over the subject to provide an overhead light. The profiled extension tube avoids heads rotating around even when used with a softbox. The two sections can be quickly adjusted with the clip-locks.

The Click mechanism on these stands enables them to be stacked in both planes, ensuring that they can be carried in the most convenient way – either edge to edge or face to face to suit your carrying bag.

The Elinchrom Air-cushioned system offers a very smooth and convenient balance between speed of use and security.

Folded size: 92 cm

The ELB 500 TTL To Go is the ideal set to enjoy total freedom in a lightweight and portable solution while still delivering 400 full power flashes on a single charge. Freeze motion in action mode or use HSS, rely on the battery for on location work or plug it in the mains while shooting in studio with the Active Charge feature.

The Elinchrom Transmitter Pro is not included in this set and must be order separately. Transmitters are available for Canon and Nikon. Other brands will follow later.

The ELB 500 TTL Dual To Go is the perfect set to be used with total asymmetry. With two independent flash heads, the unit offers a wide variety of lighting possibilities. Combined with the TTL and HSS feature, it’s effortless to use while delivering exceptional high-end results.

The Elinchrom Transmitter Pro is not included in this set and must be order separately. Transmitters are available for Canon and Nikon. Other brands will follow later.